Australia's electrical safety regulations are complex. While AS/NZS 3000:2018 (the Australian/New Zealand Wiring Rules) provides a national standard, each state and territory enforces additional licensing requirements, inspection rules, and local amendments. For instance, an electrician licensed in New South Wales may not automatically be recognized in Queensland without re-certification. As a result, a 2024 industry survey found that 78% of electrical contractors struggle with inconsistencies between different jurisdictional requirements.
This certified program will equip you with a profound understanding of Australia's complex electrical wiring standards, safety requirements, and compliance mechanisms across all jurisdictions. You will explore critical components including the Electrical Safety Acts, the Wiring Rules (AS/NZS 3000), licensing requirements, and safety verification processes. The program delves into the distinct requirements across state and territory regulatory frameworks, examining key legislation such as the Queensland Electrical Safety Act, Victoria's Electricity Safety Act, and New South Wales' electrical safety regulations, highlighting crucial differences that impact compliance strategies.
Throughout the program, you will develop expertise in creating and implementing robust electrical safety management systems that address the unique challenges posed by Australia's diverse climate conditions and stringent documentation requirements. You will master techniques for navigating the intersecting demands of electrical standards, energy efficiency regulations, and environmental considerations. Additionally, you will gain practical knowledge in conducting effective electrical safety inspections, managing compliance documentation, and implementing quality assurance processes that meet or exceed regulatory expectations.
Upon successful completion, you will attain the Certification in Australia Electrical Wiring and Safety Compliance. This certification holds lifelong and not only enhances your professional credentials but also demonstrates expertise in navigating Australia’s complex electrical wiring and safety regulations. It also represents your commitment to upholding the highest standards of electrical safety, compliance, and sustainable design.
1 Chartered Institute of Professional Certifications' reviews and ratings are a comprehensive collection of participants feedback we have gathered over the last decade. To view authentic and personal testimonials that are handwritten by our participants, please download our participants' written reviews here.
This program will entitle you:
Download Brochure Pricing & Registration- Experience 2 days of instructor-led live training with in-depth insights into Australia’s electrical wiring and safety standards, covering the full spectrum of compliance from design and installation to ongoing maintenance.
- Attain the industry-recognized Certification in Australia Electrical Wiring and Safety Compliance. This certification will enhance your professional profile and demonstrate your comprehensive expertise in key electrical regulations and safety compliance requirements essential for delivering safe, efficient, and compliant electrical solutions.
- Master essential expertise in electrical design, safety compliance, and regulatory requirements, while gaining strategic insights into energy efficiency, risk management, and multidisciplinary design coordination.
- For inquiries, chat with our Program Advisers at advisor@charteredcertifications.com or call us at
- USA: +1 888 745 8875
- Singapore and Asia Pacific: +65 6716 9980
- Australia and New Zealand: +61 3 9909 7310
- UK, Europe and Middle East: +44 (020) 335 57898
Accreditations
This program is accredited by the Chartered Institute of Professional Certifications, which maintains the governing standards for all professionals who have completed this program.
The content of this program has been fully certified and accredited by CPD Certification Service as conforming to Continuing Professional Principles. CPD is the leading independent CPD accreditation institution operating across industry sectors to complement the Continuing Professional Development policies of professional institutes and academic bodies. The CPD Certification Service provides support, advice and recognized independent CPD accreditation compatible with global CPD principles.
What Can You Expect From This Live Program
Australia’s electrical wiring standards rank among the world’s most complex, with overlapping federal, state, and territorial rules. Additionally, frequent updates to the AS/NZS 3000 Wiring Rules and varying regional interpretations create significant hurdles for electrical leaders to in maintain full compliance while operating efficiently across different regions of Australia.
This certified program will equip you with a comprehensive understanding of Australia’s complex electrical wiring standards and safety compliance requirements at both national and state levels. You will explore a wide range of essential topics, including the Australian/New Zealand Wiring Rules (AS/NZS 3000:2018), the Electrical Equipment Safety System (EESS), mandatory safety device requirements such as residual current devices (RCDs), and certification and testing obligations for electrical products and installations. Furthermore, this program will highlight critical differences in regulatory enforcement between states and territories, examining key compliance frameworks in New South Wales, Queensland, and Victoria.
Throughout the program, you will gain the knowledge and skills to design, install, test, and certify electrical systems in full compliance with the latest regulations. You will also learn how to interpret updates to the Wiring Rules, integrate renewable energy and smart technologies within compliant frameworks, and apply best practices in risk mitigation and hazard identification. Additionally, you will master the intricacies of developing comprehensive compliance documentation, including Certificates of Electrical Compliance, and understand how to effectively manage inspections, audits, and enforcement actions by regulatory authorities.
Furthermore, this program provides practical insights into managing emerging challenges such as compliance with solar PV systems, battery storage systems, and electric vehicle charging installations, ensuring your operations remain aligned with the latest regulatory and technical standards. With a solid foundation in Australia’s electrical wiring regulations and safety compliance requirements, you will be equipped to lead electrical teams, oversee complex projects, and implement robust, legally sound electrical compliance strategies that minimize risks and uphold public safety.
Upon successfully completing the program, you will earn the Certification in Australia Electrical Wiring and Safety Compliance. This certification will validate your expertise in navigating the complexities of Australia’s electrical regulations and delivering safe, efficient, and compliant electrical solutions. Globally recognized and holding lifelong validity, this certification will enhance your professional credibility and demonstrate your ability to lead effective compliance strategies across residential, commercial, and industrial projects.
Key Skills You Will Gain
- Electrical Wiring Standard AS3000
- Electrical Safety Compliance
- Risk Assessment
- Earthing Systems
- Switchboard Installation
- Hazard Identification
- Electrical Testing
- Wiring System Design AS3008
- Compliance Auditing
- Fault Diagnosis
- Regulatory Knowledge
- Cable Management
- Inspection Procedures
- Electrical Certification
- Lightning Protection
- Circuit Protection Design
- Voltage Drop Calculation
- Load Calculations
- Surge Protection Systems
- Fire Safety Compliance
- Emergency Lighting Design
- Electrical Documentation
- Design Coordination
- Smart Metering Integration
- Conduit Selection
- Bushfire Risk Compliance
- Earthing Calculations
- Workplace Safety Standards
- Tender Documentation
- Australian Lighting Standards
Your Faculty Director
Jessica Indrawirawan is a highly accomplished electrical engineering and compliance expert with over 20 years of industry experience, specializing in Australian electrical wiring standards and safety regulations. Throughout her distinguished career, she has played a pivotal role in delivering complex electrical design and compliance solutions across diverse sectors, including mining, commercial, residential, industrial, government, telecommunications, and defence.
Jessica has successfully managed and contributed to hundreds of high-profile projects, such as the Crown Towers Resort, Perth Children’s Hospital, Snowy Hydro Plant, and major defence infrastructure projects across Western Australia and the Northern Territory. She has also been instrumental in numerous large-scale commercial and residential developments. Her technical expertise covers critical areas including AS3000 Wiring Rules compliance, switchboard design and installation, earthing systems, lightning and surge protection, and energy-efficient wiring solutions aligned with the National Construction Code (NCC).
Jessica is passionate about advancing electrical safety and compliance standards and actively mentors the next generation of engineers. As an alumni of the Thrive and Ascend Women in Leadership programs, and a member of the 500 Women in Property 2023 initiative, she regularly speaks at industry forums, universities, and public platforms, inspiring young professionals—particularly women—to pursue excellence in STEM and electrical engineering careers.
Certified Australia Electrical Wiring Standards and Safety Compliance Program Agenda
How You Will Benefit From This Program
- Master Australia’s Electrical Compliance Framework: Gain a comprehensive understanding of Australian electrical wiring standards, including key compliance requirements under AS3000, AS3008, and the National Construction Code (NCC).
- Design Safe and Compliant Electrical Installations: Learn to apply wiring rules, select appropriate cable sizes, and implement protection systems to ensure safe and efficient electrical installations.
- Ensure Compliance with Switchboard Design and Installation: Understand mandatory switchboard components, installation requirements, and certification standards aligned with AS61439.
- Implement Effective Earthing and Bonding Systems: Explore design principles for safe earthing systems, bonding techniques, and compliance with critical standards such as AS2067 and AS3017.
- Master Lightning and Surge Protection: Learn how to design and implement lightning protection systems and surge protection devices in accordance with AS1768.
- Conduct Accurate Load and Voltage Drop Calculations: Apply practical techniques for maximum demand calculations, voltage drop assessments, and designing for future load expansion.
- Integrate Energy-Efficient Wiring Solutions: Understand sustainable wiring practices, energy efficiency requirements under NCC Section J, and smart metering technologies.
- Perform Comprehensive Electrical Risk Assessments: Gain practical strategies for hazard identification, risk mitigation, and compliance with workplace safety standards under AS4836.
- Develop High-Quality Electrical Documentation: Master the preparation of compliant electrical drawings, schematics, and specifications essential for project success and regulatory approvals.
Certification in Australia Electrical Wiring and Safety Compliance
Upon successfully attending this program, you will be awarded with the Certification in Australia Electrical Wiring and Safety Compliance that can be used in your resume, CV and other professional credentials. This certification is industry-recognized with lifelong validity.
Globally demanded and recognized, this certification will amplify your expertise in ensuring safe and compliant electrical design, installation, and maintenance in accordance with Australia’s latest wiring and safety standards. It also validates your capability to develop and implement comprehensive electrical compliance frameworks aligned with Australian Standards, the National Construction Code (NCC), and industry best practices. This program is developed by Chartered Institute of Professional Certifications and the content of this program has been certified by CPD Certification Service as adhering to highest standards of continuing professional principals.
Pricing & Registration
Australia
Dates: 15 - 16 Jan 2026
Venue: Online Executive Program (via Zoom)
Time: 10:00am - 5:30pm Australia Eastern Daylight Time (AEDT)
| Early Bird Packages | Regular Pricing | ||
|---|---|---|---|
| By 22 Oct 2025 | By 03 Dec 2025 | After 03 Dec 2025 | |
| Australia Delegates | AUD 1,895 | AUD 2,095 | AUD 2,195 |
Group Discount: 2nd participant get 10%, or register 3 participants and 4th participant get a complimentary seat (1 discount scheme applies)
Register NowDownload Brochure
You can download our program brochure below. If you have any inquiries on this program, please contact our Program Advisor at advisor@charteredcertifications.com or call us at:
- Singapore and Asia Pacific: +65 6716 9980
- Australia and New Zealand: +61 3 9909 7310
- UK, Europe and Middle East: +44 (020) 335 57898
- USA: +1 888 745 8875
Convincing Your Boss To Attend This Program
Securing approval from your boss to attend this program can be difficult if you don’t know what to say. So we’ve prepared a template for you! All you need to do is to download this template, copy and paste in email and send it to your boss!
Certified Australia Electrical Wiring Standards and Safety Compliance
4.6 (919 ratings)